Technical Library

Certified Hardware and Software

OpenROUTE

Router Setup Packet


What You Need

Setup

Configuration

Commands

Troubleshooting

Routing with Proteon GlobeTrotter 60 for Dedicated Access Service

What You Need

You will need a CSU/DSU with a serial connection and an RJ45 straight through cable to run from the demarc to the CSU/DSU.

You also need the appropriate cable to connect the GlobeTrotter 60 unit to your Local Network. You can use BNC or UTP with a GlobeTrotter 60 to connect to your LAN.

The GlobeTrotter 60 comes with a cable to connect an out of band console with a null modem adapter.

You will need a v.35 cable to connect the WAN port to the CSU/DSU. The WAN port of the GlobeTrotter 60 is a 44 pin female v.35 connector.