Netopia R2121
Routing with Netopia R2121 for LAN-Dial Service
Configuration
After telnetting into the router, select the bolded menu choices and set the parameters as indicated in the following screen shots. Use the Esc key to navigate to previous screens.
-------------------------------------------------------------------
EASY SETUP...
Connection Profile : ISP
Number to Dial: 999-9999
Address Translation Enabled: No
IP Addressing... Unnumbered
Remote IP address: 38.1.1.1
Remote IP mask: 255.255.255.0
PPP Authentication: PAP
Send User Name: LDXXXX
Send Password: ********
PREVIOUS SCREEN NEXT SCREEN
Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.
-------------------------------------------------------------------
NEXT SCREEN...
IP Easy Setup
Ethernet IP Address: 38.xxx.yyy.1
Ethernet Subnet Mask: 255.255.255.0
Domain Name:
Primary Domain Name Server: 38.9.221.2
Secondary Domain Name Server: 38.9.211.2
Default IP Gateway: 38.1.1.1
IP Address Serving: OFF
PREVIOUS SCREEN NEXT SCREEN
Enter an IP address in decimal and dot for (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your netopia in the screen.
-------------------------------------------------------------------
Easy Setup Security Configuration
It is strongly suggested that you password-protect configuration access to your
Netopia. By entering a Name and Password pair here, access via serial,
Telnet, SNMP and Web Server will be password-protected.
Be sure to remember what you have typed here, because you will be prompted for
it each time you configure this Netopia.
You can remove an existing Name and Password by clearing both fields below.
Write Access Name:
Write Access Password:
PREVIOUS SCREEN TO MAIN MENU RESTART DEVICE
Return/Enter takes you back to previous screen.
Configure a Configuration Access Name and Password here.
-------------------------------------------------------------------
|
