Technical Library

Certified Hardware & Software

NetHopper

LAN-ISDN


What You Need

Setup

Configuration

Custom Configuration Builder

Routing with NetHopper for LAN-ISDN Service

What You Need

All NetHopper models that are certified for LAN-ISDN Service share the following features:

• Included or optional internal 28.8K modems (V.34)
• ISDN BRI interface with integrated NT-1
• IP and IPX routing, separately or simultaneously
• PPP, IPCP, IPXCP, PAP and CHAP protocols
• Remote client access
• Extensive IP and IPX packet filtering on all interfaces
• One Ethernet Port (AUI or 10BaseT)

Included in the NetHopper Kit are the following:

• NetHopper unit
• Power supply unit
• Power supply cable
• Console cable (9 pin to 9 pin)
• Adapter cable (9 pin to 25 pin)
• Modem cable(s)
• Documentation packet

You will need:

• An ISDN BRI line

• A DOS/Windows Based PC to edit the bootup disk
  
  OR

• A VT-100 terminal emulator with an RS-232 port to connect as an out of band console.

• An Ethernet cable to connect to your LAN. If you have a 10Base2 (BNC) network you will need an AUI to 10Base2 (BNC) transciever.

• You must also have version 4.2 or newer of NetHopper Operating System: