Technical Library

Certified Hardware & Software

NetHopper

LAN-Dial

Router Setup Packet


What You Need

Setup

Configuration

Custom Configuration Builder

IP Filtering on NH-BRI

To increase network security, the NetHopper provides extensive IP filtering capabilities. IP filtering provides a way to limit network access, that can be customized to meet specific network needs.

• Specific packets that are allowed to be forwarded.

• Specific packets that are excluded from the forwarding process.

• Filtering by interface, frame type, source address, destination address, packet type, and traffic direction.

• A no dial option that allows you to control the traffic that will cause the router to place outgoing phone calls.

• A combination of the above.

To install filters:

Enter the filter set into your router and enable the filtering option.

• Enter the filter set
  
  filter enable

• The filters will now be active. To turn them off, type:
  
  filter disable

• To remove the filters, type:
  
  filter flush