Technical Library

Certified Hardware and Software

Livingston IRX 211

Router Setup Packet


What You Need

Setup

Configuration

Commands

Routing with the Livingston IRX 211 for Leased Line

Configuring a Livingston IRX 211 Via the Console

Wiring Diagram

To configure a Livingston IRX-211 you must connect a console to the Console port of the router. A null modem cable is required.

Connect the null modem cable to the console port (S0) of the IRX and to a PC (or Mac with proper cables) with VT100 emulation software.

9600, 8, none 1

Follow the configuration template.

Otherwise you can telnet into the box.

Livingston IRX-211 Router Rear View

The Livingston IRX-211 comes with the following:

Cables:

• DB9F - DB25M Console Cable
  (DB25F-DB25F null modem adapter is included)

Ports:

• Two Ethernet Interfaces with 10BaseT/BNC/AUI connection
• One Serial WAN port v.35/RS232 (DB25 F)
• One Serial Console port DB25F

To connect the router to the demarc, connect the RJ45 provided with the CSU/DSU to the demarc and to the CSU/DSU. Connect the V.35 - DB25 cable to the CSU/DSU and to the WAN port on the router.