Technical Library

Certified Hardware and Software

Intel Routers

Intel Express 9100 Router


What You Need

Setup

Configuration

Troubleshooting

OS Upgrade

Wiring Diagram

Routing with the Intel Express 9100 Router for Leased Line

Setup Instructions

• Connect the serial cable from WAN 1 on the back of the router to the User Interface of the CSU/DSU.
  
  
• Connect the T1 or 56k cable from the demarc to the Network Interface on the CSU/DSU.
  
  
• Insert an RJ45 cable in the router's Ethernet port. Use a straight through cable if from a hub or cross over if from the Ethernet card.

• Connect the power cords to each unit, power up the CSU/DSU, then the router. Allow a few minutes for diagnostics, then check the front panel for link lights.

Intel Express 9100 Router Rear View

Wiring Diagram:   Intel 9100