MicroRouter 1250i/1270i Configuration for Dedicated Access Service
Pre OS 4.0.1
interface wan b
set wan mode off
interface wan a
set ip on
set ip wan numbered
set ip wan notrigger
set ip address SERIALIP
set ip mask 255.255.255.0
set ip broadcast POPIP.255
set ip flags rip1
set frelay dlci DLCI ip map POPIP.1 Broad
set frelay maint ANNEXD 10
set frelay mtu 1500
set wan mode frelay
set wan connect mode dedicated
set wan serial type sync External_tx_clock
reset ip routing 0.0.0.0 0.0.0.0 config
add ip route 0.0.0.0 0.0.0.0 POPIP.1 1 config
set wan csu channels start 1
set wan csu channels count #OFCHANNELS
set wan csu channels contiguous
set wan csu clock slave
set wan csu coding b8zs
set wan csu data normal
set wan csu framing esf
set wan csu lbo db0
set wan csu prm disable
set wan csu rate data64
set wan csu loopback accept all
interface ethernet a
set ip on
set ip address LANIP.1
set ip mask 255.255.255.0
set ip broadcast LANIP.255
set ip flags rip1
set password yourpassword
set system name DOMAIN
save
|
