Technical Library

Certified Hardware & Software

Compatible Routers

Dedicated Access

Router Setup Packet

What You Need

Setup

Configuration

Commands

Troubleshooting

900i/1220i Wiring Diagram

Routing with Compatible Systems MicroRouter 1220i for Dedicated Access Service

Setup Instructions

There are three ways to configure the unit.

1. Using the RS-232 cable provided, a console session can be set up with a VT100 terminal emulator running on a PC or a MAC.

2. If the MicroRouter has been preconfigured with an Ethernet IP address, you can telnet to the unit over your LAN.

3. You may also connect over your LAN via the RouterView software provided.