| clear | Reset functions |
| clock | Manage the system clock |
| configure | Enter configuration mode |
| debug | Debugging functions (see also 'undebug') |
| disable | Turn off privileged commands |
| enable | Turn on privileged commands |
| erase | Erase flash or configuration memory |
| exit | Exit from the EXEC |
| help | Description of the interactive help system |
| login | Log in as a particular user |
| logout | Exit from the EXEC |
| no | Disable debugging functions |
| ping | Send echo messages |
| reload | Halt and perform a cold restart |
| setup | Run the SETUP command facility |
| show | Show running system information |
| telnet | Open a telnet connection |
| terminal | Set terminal line parameters |
| test | Test subsystems, memory, and interfaces |
| traceroute | Trace route to destination |
| tunnel | Open a tunnel connection |
| undebug | Disable debugging functions (see also 'debug') |
| verify | Verify checksum of a Flash file |
| write | Write running configuration to memory, network, or terminal |
|
| show | |
| access-lists | List access lists |
| arp | ARP table |
| buffers | Buffer pool statistics |
| configuration | Contents of Non-Volatile memory |
| controllers | Interface controller status |
| debugging | State of each debugging option |
| dialer | Dialer parameters and statistics |
| extended | Extended Interface Information |
| flash | System Flash information |
| flh-log | Flash Load Helper log buffer |
| history | Display the session command history |
| hosts | IP domain-name, lookup style, name servers, and host table |
| interfaces | Interface status and configuration |
| ip | IP information |
| isdn | ISDN information |
| line | TTY line information |
| logging | Show the contents of logging buffers |
| memory | Memory statistics |
| privilege | Show current privilege level |
| processes | Active process statistics |
| protocols | Active network routing protocols |
| queue | Show queue contents |
| queueing | Show queueing configuration |
| reload | Scheduled reload information |
| route-map | route-map information |
| running-config | Current operating configuration |
| sessions | Information about Telnet connections |
| smf | Software MAC filter |
| stacks | Process stack utilization |
| startup-config | Contents of startup configuration |
| subsys | Show subsystem information |
| tcp | Status of TCP connections |
| terminal | Display terminal configuration parameters |
| users | Display information about terminal lines |
| version | System hardware and software status |
