Ascend Pipeline 130
Commands & Menu Overview
Menu
The menu structure within the Pipeline 130 is shown below.
+- Configure...
| +- 00-201 Restore Cfg
| |
| +- 00-202 Save Cfg
| |
| +- 00-100 Sys Config +- 00-203 Sys Reset
| | |
| +- 00-200 Sys Diag ---------+- 00-204 Term Serv
| |
+- 00-000 System ---+- 00-300 Security ----------- 00,301,302,303
|
Main Edit --+
|
+- 20-000 Ethernet -+- 20-100 Connections -------- 20-101,102,103,104
| |
| +- 20-200 Bridge Adrs -------- 20-201,202,203,204
| | 205,206,207,208
| |
| +- 20-300 Static Rts --------- 20-3**,301,302,303
| |
| +- 20-400 Filters ------------ 20-41,402,403,404
| |
| +- 20-500 Frame Relay -------- 20-501
| |
| +- 20-600 Answer
| |
| +- 20-700 SNMP Traps --------- 20-701,702
| |
| +- 20-800 Mod Config
|
|
+- 30-000 Nailed T1 -+- 30-100 Mod Config
There is also a terminal server (command line) mode.
To get to the terminal server mode, follow the menu structure down to the 00-204 Term Serv entry.
Commands
Commands - General
These are valid commands:
| ? | Display help information |
| help | Display help information |
| quit | Close the terminal server session |
| hangup | Close the terminal server session |
| test | test <phone-number> [<frame-count>] [<opt fields>] |
| local | Go to local mode |
| set | Set various items. Type 'set ?' for help |
| show | Show various items. Type 'show ?' for help |
| iproute | Manage IP routes. Type 'iproute ?' for help |
| telnet | telent [-a | -b] <host-name> [<port-number>] |
| tcp | tcp <host-name> <port-number> |
|
| set ? | Display help information |
| set all | Display current settings |
| set term | Set the telnet terminal |
|
| show ? | Display the help information |
| show arp | Display the Arp Cache |
| show icmp | Display the ICMP information |
| show if | Display Interface info. Type 'show if ?' for help. |
| show ip | Display IP information. Type 'show ip ?' for help. |
| show udp | Display UDP information. Type 'show udp ?' for help. |
| show tcp | Display TCP information. Type 'show tcp ?' for help. |
| show isdn | Display ISDN events. Type 'show isdn <line number> |
|
| show if ? | Display help information |
| show if stats | Display Interface Statistics |
| show if totals | Display Interface Total counts |
|
| show ip ? | Display help information |
| show ip stats | Display IP Statistics |
| show ip address | Display IP Address Assignments |
| show ip routes | Display IP Routes |
|
| show udp ? | Display help information |
| show udp stats | Display UDP Statistics |
| show udp listen | Display UDP Listen Table |
|
| show tcp ? | Display help information |
| show tcp stats | Display TCP Statistics |
| show tcp connection | Display TCP Connection Table |
|
| iproute ? | Display help information |
| iproute add | iproute add <dest> <gateway> [metric] |
| iproute delete | iproute delete <dest> <gateway> |
| iproute show | display IP routes |
|
| Hit [control] 1 at beginning of connections | Refresh the screen |
| Use up and down arrow keys and hit [enter] | Select items |
| Press [Esc] | Exit out of one menu |
Other Useful Commands
NOTE:
- Press Ctrl-n to move the cursor to the next menu item.
- Press Return to select the item.
- Press Tab to move to another window.
- A thick border indicates an active window.
View the Software Version
View the Serial IP
Add a Static Route
Change the Dial Number
Force the Router to Dial
Ping from the Router
Traceroute from the Router
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|Main Edit Menu | |10-100 1 | |00-200 00:02:52 |
|>Configure... | | Link D | |>M31 Line Ch |
| 00-000 System | | B1 - | | Call Terminated |
| 20-000 Ethernet | | B2 - | | |
| 30-000 Serial WAN | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 9 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
From the Main Edit Menu, go to Ethernet.
+--------- FR EDIT ------------+ +--------------------+ +--------------------+
|Main Edit Menu | |10-100 1 T1/CSU | |00-200 17:34:42 |
| Configure... | | Link X RED | |>M31 Line Ch |
| 00-000 System | | B1 . | | Call Terminated |
| 20-000 Ethernet | | B2 . | | |
| 30-000 Nailed T1 | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 10 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| |>Enet I/F: AUI |
From Ethernet, go to Connections.
+--------- FR EDIT ------------+ +--------------------+ +--------------------+
|20-000 Ethernet | |10-100 1 T1/CSU | |00-200 17:35:42 |
| 20-100 Connections | | Link X RED | |>M31 Line Ch |
| 20-200 Bridge Adrs | | B1 . | | Call Terminated |
| 20-300 Static Rtes | | B2 . | | |
| 20-400 Filters | +--------------------+ +--------------------+
| 20-500 Frame Relay | |20-100 Sessions | |20-500 DYN Stat |
| 20-600 Answer | |> 0 Active | | Qual N/A 00:00:00 |
| 20-700 SNMP Traps | | | | 0K 0 channels |
| 20-800 IPX Routes | | | | CLU 0% ALU 0% |
| 20-900 IPX SAP Filters | +--------------------+ +--------------------+
| 20-A00 NAT | |20-300 WAN Stat | |20-400 Ether Stat |
| 20-B00 Mod Config | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 10 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| |>Enet I/F: AUI |
From Connections, go to InternetFR.
+------- InternetFR EDIT ------+ +--------------------+ +--------------------+
|20-100 Connections | |10-100 1 T1/CSU | |00-200 17:36:32 |
| 20-101 - Internet | | Link X RED | |>M31 Line Ch |
| 20-102 InternetFR | | B1 . | | Call Terminated |
| 20-103 | | B2 . | | |
| 20-104 | +--------------------+ +--------------------+
| 20-105 | |20-100 Sessions | |20-500 DYN Stat |
| 20-106 | |> 0 Active | | Qual N/A 00:00:00 |
| 20-107 | | | | 0K 0 channels |
| 20-108 | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 10 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| |>Enet I/F: AUI |
From InternetFR, go to IP Options.
+------- InternetFR EDIT ------+ +--------------------+ +--------------------+
|20-102 InternetFR | |10-100 1 T1/CSU | |00-200 17:37:33 |
| Station=InternetFR ^| | Link X RED | |>M31 Line Ch |
| Active=Yes | | B1 . | | Call Terminated |
| Encaps=FR | | B2 . | | |
| Dial #=N/A | +--------------------+ +--------------------+
| Alt Dial #1= | |20-100 Sessions | |20-500 DYN Stat |
| Alt Dial #2= | |> 0 Active | | Qual N/A 00:00:00 |
| Alt Dial #3= | | | | 0K 0 channels |
| Calling #=N/A | | | | CLU 0% ALU 0% |
| Called #=N/A | +--------------------+ +--------------------+
| Route IP=Yes | |20-300 WAN Stat | |20-400 Ether Stat |
| Route IPX=N/A | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| Bridge=N/A | | Tx Pkt: 0 | | Tx Pkt: 10 |
| Dial brdcast=N/A | | CRC: 0v| | Col: 0 |
| Encaps options... | +--------------------+ +--------------------+
| Ip options... | |00-100 Sys Option | |00-400 HW Config |
| Ipx options... v| |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| |>Enet I/F: AUI |
In IP Options, you will find the serial IP address.
+------- InternetFR EDIT ------+ +--------------------+ +--------------------+
|20-102 InternetFR | |10-100 1 T1/CSU | |00-200 17:38:43 |
| Ip options... | | Link X RED | |>M31 Line Ch |
| LAN Adrs=38.21.10.1/24 | | B1 . | | Call Terminated |
| WAN Alias=0.0.0.0 | | B2 . | | |
| IF Adrs=38.21.10.102/24 | +--------------------+ +--------------------+
| Preference=100 | |20-100 Sessions | |20-500 DYN Stat |
| Metric=1 | |> 0 Active | | Qual N/A 00:00:00 |
| DownPreference=120 | | | | 0K 0 channels |
| DownMetric=7 | | | | CLU 0% ALU 0% |
| Private=No | +--------------------+ +--------------------+
| RIP=Send-v2 | |20-300 WAN Stat | |20-400 Ether Stat |
| Client Pri DNS=0.0.0.0 | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| Client Sec DNS=0.0.0.0 | | Tx Pkt: 0 | | Tx Pkt: 10 |
| Client Assign DNS=Yes | | CRC: 0v| | Col: 0 |
| Client Gateway=0.0.0.0 | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| |>Enet I/F: AUI |
From the Main Edit Menu, go to Ethernet.
+------------ EDIT ------------+ +--------------------+ +--------------------+
|Main Edit Menu | |10-100 1 T1/CSU | |00-200 00:00:03 |
| Configure... | | Link X RED | |>M31 Line Ch |
| 00-000 System | | B1 . | | Ethernet Up |
| 20-000 Ethernet | | B2 . | | |
| 30-000 Nailed T1 | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
From Ethernet, choose Static Routes.
+------------ EDIT ------------+ +--------------------+ +--------------------+
|20-000 Ethernet | |10-100 1 T1/CSU | |00-200 00:00:03 |
| 20-100 Connections | | Link X RED | |>M31 Line Ch |
| 20-200 Bridge Adrs | | B1 . | | Ethernet Up |
| 20-300 Static Rtes | | B2 . | | |
| 20-400 Filters | +--------------------+ +--------------------+
| 20-500 Frame Relay | |20-100 Sessions | |20-500 DYN Stat |
| 20-600 Answer | |> 0 Active | | Qual N/A 00:00:00 |
| 20-700 SNMP Traps | | | | 0K 0 channels |
| 20-800 IPX Routes | | | | CLU 0% ALU 0% |
| 20-900 IPX SAP Filters | +--------------------+ +--------------------+
| 20-A00 NAT | |20-300 WAN Stat | |20-400 Ether Stat |
| 20-B00 Mod Config | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
From Static Routes, choose any unused route.
+------------ EDIT ------------+ +--------------------+ +--------------------+
|20-300 Static Rtes | |10-100 1 T1/CSU | |00-200 00:00:03 |
| 20-3** Default | | Link X RED | |>M31 Line Ch |
|>20-301 | | B1 . | | Ethernet Up |
| 20-302 | | B2 . | | |
| 20-303 | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
Enter in the static route information.
+------------ EDIT ------------+ +--------------------+ +--------------------+
|20-301 | |10-100 1 T1/CSU | |00-200 00:00:03 |
|>Name= | | Link X RED | |>M31 Line Ch |
| Active=No | | B1 . | | Ethernet Up |
| Dest=0.0.0.0/0 | | B2 . | | |
| Gateway=0.0.0.0 | +--------------------+ +--------------------+
| Metric=8 | |20-100 Sessions | |20-500 DYN Stat |
| Preference=60 | |> 0 Active | | Qual N/A 00:00:00 |
| Private=No | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
NOTE: The name of the route (Name=) is not important. You can have whatever you like in this field.
- Set Active=Yes (hit TAB to switch between Yes and No).
- Dest = Destination network for the static route.
- Gateway = Gateway of the static route.
- Metric = Number of hops to gateway. Metric is usually 1.
- Preference = Priority on the static route. We suggest using a preference of 100.
- Private = Whether the route should be advertised. Usually set to No.
When done, hit <ESC> to back out to the Main Edit Menu. You will see a screen asking you to save the changes.
+------------ EDIT ------------+ +--------------------+ +--------------------+
|EXIT? | |10-100 1 T1/CSU | |00-200 00:00:03 |
| 0=ESC (Don't exit) | | Link X RED | |>M31 Line Ch |
| 1=Exit and discard | | B1 . | | Ethernet Up |
| 2=Exit and accept | | B2 . | | |
| | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
Choose Exit and accept; it will say "Profile Stored."
+------------ EDIT ------------+ +--------------------+ +--------------------+
|Message #117 | |10-100 1 T1/CSU | |00-200 00:00:03 |
| Profile stored | | Link X RED | |>M31 Line Ch |
| | | B1 . | | Ethernet Up |
| | | B2 . | | |
| | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 0^| |>Rx Pkt: 8 |
| | | Tx Pkt: 0 | | Tx Pkt: 8 |
| | | CRC: 0v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | | Security Prof: 3 ^| |>BRI Interface |
| | |>Software +5.1Ap9+ | | Adrs: 00c07b6b5657 |
| | | S/N: 7026455 v| | Enet I/F: AUI |
To change the number the router is dialing, go to Configure, off the Main Edit Menu.
The Configure Menu will look like this.
+-------- LI0CSG EDIT ---------+ +--------------------+ +--------------------+
|Configure... | |10-100 1 | |00-200 22:28:24 |
| Switch Type=NI-1 ^| | Link D | |>M31 Line Ch |
| Chan Usage=Switch/Switch | | B1 - | | Call Terminated |
| My Num A=5182836671 | | B2 - | | |
| My Num B=5182836672 | +--------------------+ +--------------------+
| SPID 1=51828366710101 | |20-100 Sessions | |20-500 DYN Stat |
| SPID 2=51828366720101 | |> 0 Active | | Qual N/A 00:00:00 |
| My Name=LI0CSG | | | | 0K 0 channels |
| My Addr=38.1.1.1/8 | | | | CLU 0% ALU 0% |
| Rem Name=Internet | +--------------------+ +--------------------+
| Rem Addr=38.1.1.1/8 | |20-300 WAN Stat | |20-400 Ether Stat |
|>Dial #=18187812158 | |>Rx Pkt: 3108^| |>Rx Pkt: 162601 |
| Route=IP | | Tx Pkt: 9595 | | Tx Pkt: 155425 |
| NAT Routing=No | | CRC: 12v| | Col: 0 |
| NAT Profile=N/A | +--------------------+ +--------------------+
| Bridge=No | |00-100 Sys Option | |00-400 HW Config |
| Send Auth=PAP | |>Security Prof: 1 ^| |>BRI Interface |
| Send PW=******* | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| Recv Auth=None v| | S/N: 7085905 v| | Enet I/F: UTP |
Arrow down to Dial #= and hit <return>.
+-------- LI0CSG EDIT ---------+ +--------------------+ +--------------------+
|Configure... | |10-100 1 | |00-200 22:28:24 |
| Switch Type=NI-1 ^| | Link D | |>M31 Line Ch |
| Chan Usage=Switch/Switch | | B1 - | | Call Terminated |
| My Num A=5182836671 | | B2 - | | |
| My Num B=5182836672 | +--------------------+ +--------------------+
| SPID 1=51828366710101 | |20-100 Sessions | |20-500 DYN Stat |
| SPID 2=51828366720101 | |> 0 Active | | Qual N/A 00:00:00 |
| My Name=LI0CSG | | | | 0K 0 channels |
| My Addr=38.1.1.1/8 | | | | CLU 0% ALU 0% |
| Rem Name=Internet | +--------------------+ +--------------------+
| Rem Addr=38.1.1.1/8 | |20-300 WAN Stat | |20-400 Ether Stat |
|Dial #: | |>Rx Pkt: 3108^| |>Rx Pkt: 162601 |
| [18187812158] | | Tx Pkt: 9595 | | Tx Pkt: 155425 |
| | | CRC: 12v| | Col: 0 |
| NAT Profile=N/A | +--------------------+ +--------------------+
| Bridge=No | |00-100 Sys Option | |00-400 HW Config |
| Send Auth=PAP | |>Security Prof: 1 ^| |>BRI Interface |
| Send PW=******* | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| Recv Auth=None v| | S/N: 7085905 v| | Enet I/F: UTP |
Type in the new number and hit <return>.
Then arrow down to the bottom of that same menu and hit <return> on save=.
+-------- LI0CSG EDIT ---------+ +--------------------+ +--------------------+
|Configure... | |10-100 1 | |00-200 22:28:24 |
| Recv Auth=None ^| | Link D | |>M31 Line Ch |
| Recv PW=N/A | | B1 - | | Call Terminated |
| Save= | | B2 - | | |
| | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 3108^| |>Rx Pkt: 162601 |
| | | Tx Pkt: 9595 | | Tx Pkt: 155425 |
| | | CRC: 12v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: UTP |
It will say "Profile Stored."
Off the Main Edit Menu, go to Configure. From Configure, hit <control> d.
You will get this screen:
+-------- LI0CSG EDIT ---------+ +--------------------+ +--------------------+
|Configure... | |10-100 1 | |00-200 17:06:35 |
|DO... | | Link D | |>M31 Line Ch |
| 0=Esc | | B1 - | | Call Terminated |
| 1=Dial | | B2 - | | |
| P=Password | +--------------------+ +--------------------+
| E=Termsrv | |20-100 Sessions | |20-500 DYN Stat |
| D=Diagnostics | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 3499^| |>Rx Pkt: 162606 |
| | | Tx Pkt: 10044 | | Tx Pkt: 155426 |
| | | CRC: 6231v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| | BRI Interface |
| | | Software +5.0A+ | |>Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: UTP |
Arrow down and hit <return> on 1=Dial (or just hit 1).
You will see up in the top right box the Outgoing Call and the number
the router is calling, which should match the Dial #= in the Configure Menu.
+-------- LI0CSG EDIT ---------+ +--------------------+ +--------------------+
|Configure... | |10-100 1 | |00-200 17:59:15 |
|>Switch Type=NTI ^| | Link D | |>M31 Line Ch |
| Chan Usage=Switch/Switch | | B1 d | | Outgoing Call |
| My Num A=5182836671 | | B2 - | | 17139702246 |
| My Num B= | +--------------------+ +--------------------+
| SPID 1=51828366710101 | |20-100 Sessions | |20-500 DYN Stat |
| SPID 2=51828366720101 | |> 1 Active | | Qual N/A 00:00:00 |
| My Name=LI0CSG | | C LI0CSG | | 0K 0 channels |
| My Addr=204.243.195.33/24 | | | | CLU 0% ALU 0% |
| Rem Name=LI0CSG | +--------------------+ +--------------------+
| Rem Addr=38.1.1.1/8 | |20-300 WAN Stat | |20-400 Ether Stat |
| Dial #=17139702246 | |>Rx Pkt: 3509^| |>Rx Pkt: 162606 |
| Route=IP | | Tx Pkt: 10055 | | Tx Pkt: 155426 |
| NAT Routing=No | | CRC: 6231v| | Col: 0 |
| NAT Profile=N/A | +--------------------+ +--------------------+
| Bridge=No | |00-100 Sys Option | |00-400 HW Config |
| Send Auth=PAP | |>Security Prof: 1 ^| | BRI Interface |
| Send PW=******* | | Software +5.0A+ | |>Adrs: 00c07b6c3e91 |
| Recv Auth=None v| | S/N: 7085905 v| | Enet I/F: UTP |
The top right box should also say Call Connected or Call Terminated.
From the Main Edit Menu, go to System.
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|Main Edit Menu | |10-100 1 | |00-200 00:02:58 |
| Configure... | | Link D | |>M31 Line Ch |
| 00-000 System | | B1 - | | Call Terminated |
| 20-000 Ethernet | | B2 - | | |
| 30-000 Serial WAN | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
From System, choose Sys Diag.
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|00-000 System | |10-100 1 | |00-200 00:02:58 |
| 00-100 Sys Config | | Link D | |>M31 Line Ch |
| 00-200 Sys Diag | | B1 - | | Call Terminated |
| 00-300 Security | | B2 - | | |
| | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
From Sys Diag, choose Term Serv.
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|00-200 Sys Diag | |10-100 1 | |00-200 00:02:58 |
| 00-201 Restore Cfg | | Link D | |>M31 Line Ch |
| 00-202 Save Cfg | | B1 - | | Call Terminated |
| 00-203 Sys Reset | | B2 - | | |
| 00-204 Term Serv | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
You will see the screen change to:
** Ascend Pipeline Terminal Server **.
ascend%
From the ascend% prompt, you can type ping <address>
Example:
ascend% ping 38.8.14.2
NOTE: To exit the terminal server and get back to the normal menus, type QUIT.
From the Main Edit Menu, go to System.
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|Main Edit Menu | |10-100 1 | |00-200 00:02:58 |
| Configure... | | Link D | |>M31 Line Ch |
| 00-000 System | | B1 - | | Call Terminated |
| 20-000 Ethernet | | B2 - | | |
| 30-000 Serial WAN | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
From System, choose Sys Diag.
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|00-000 System | |10-100 1 | |00-200 00:02:58 |
| 00-100 Sys Config | | Link D | |>M31 Line Ch |
| 00-200 Sys Diag | | B1 - | | Call Terminated |
| 00-300 Security | | B2 - | | |
| | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
From Sys Diag, choose Term Serv:
+-------- LI1CSG EDIT ---------+ +--------------------+ +--------------------+
|00-200 Sys Diag | |10-100 1 | |00-200 00:02:58 |
| 00-201 Restore Cfg | | Link D | |>M31 Line Ch |
| 00-202 Save Cfg | | B1 - | | Call Terminated |
| 00-203 Sys Reset | | B2 - | | |
| 00-204 Term Serv | +--------------------+ +--------------------+
| | |20-100 Sessions | |20-500 DYN Stat |
| | |> 0 Active | | Qual N/A 00:00:00 |
| | | | | 0K 0 channels |
| | | | | CLU 0% ALU 0% |
| | +--------------------+ +--------------------+
| | |20-300 WAN Stat | |20-400 Ether Stat |
| | |>Rx Pkt: 316^| |>Rx Pkt: 8 |
| | | Tx Pkt: 397 | | Tx Pkt: 9 |
| | | CRC: 13221v| | Col: 0 |
| | +--------------------+ +--------------------+
| | |00-100 Sys Option | |00-400 HW Config |
| | |>Security Prof: 1 ^| |>BRI Interface |
| | | Software +5.0A+ | | Adrs: 00c07b6c3e91 |
| | | S/N: 7085905 v| | Enet I/F: AUI |
You will see the screen change to:
** Ascend Pipeline Terminal Server **
ascend%
From the ascend% prompt, you can type traceroute <address>.
Example:
ascend% traceroute 38.8.14.2
NOTE: To exit the terminal server and get back to the normal menus, type QUIT.
|
